How to enable Javascript

How can we help?

installation

How to Install the Cove Security System
The video above is a walkthrough of our installation process. We also have instructional videos for installing individual sensors, these are the articles linked below.…
- 1 mth ago
- 4 replies
- 21,810
- 3
- Admin2Cove Employee7 mths ago
- Cove Touch Panel Installation
Commonly Asked Questions
Welcome to Cove We are so excited that you have purchased our system and look forward to helping to provide peace of mind to you and your loved ones. You may have several questions regarding what to…
- 2 mths ago
- 9,148
- 5
- Just Ordered, Now What?
Preferred Locations for your Touch Screen Panel
Your panel serves as the heart of your system and should be placed in a central location in your home. Your panel should be plugged into an outlet at all times;…
- 2 mths ago
- 4,218
- 4
- Cove Touch Panel Installation
Alarm Certificate
As a homeowner, one of the great benefits of purchasing a security system is that you can receive a discount on your homeowners' insurance. Of course, your insurance company will want proof of…
- 5 mths ago
- 5 replies
- 3,984
- 6
- CoveCove Employee6 mths ago
- After Install
Installing Door Sensors
Step by Step Guide If you are adding new equipment to your alarm system, make sure you have already added this Door Sensor to your alarm system before you install this piece of equipment.…
- 5 mths ago
- 3,960
- Installing Sensors
What Do I Do If I Move To a New Home or Location?
Removing your sensors Unplug your panel from the wall Press and hold both the Home and Call buttons down at the same time for 12 seconds Enter your four-digit master code With your panel now powered…
- 3 mths ago
- 3 replies
- 3,377
- 5
- Admin2Cove Employee8 mths ago
- Just Ordered, Now What?
Alarm Permit
An alarm permit is a registration that some alarm users need to obtain through their local city or county municipality. Most alarm permits are intended to help local authorities regulate false…
- 7 mths ago
- 3,134
- 5
- After Install
Installing Glass Break Detectors
Step by Step Guide: If you are installing new equipment to your alarm system, make sure you have already added this Glass Break Detector to your alarm system before you install this piece of…
- 5 mths ago
- 2 replies
- 3,084
- CoveCove Employee1 yr ago
- Installing Sensors
Stuck During Setup Process Steps 1-6
If you are having trouble with your installation, this article aims to: Explain the different steps of pre-installation Troubleshoot your panel if it gets stuck on one of the first six steps…
- 3 mths ago
- 2,976
- 2
- Cove Touch Panel Installation
Installing Motion Detectors
Step by Step Guide If you are adding new equipment to your alarm system, make sure you have already added the Motion Detector to your alarm system before you install this piece of equipment.…
- 3 wk ago
- 2,748
- Installing Sensors
How Do I Order Replacement Batteries?
If you are needing to replace the batteries for your different sensors, you can use the list below to assist you in locating batteries at both local and online retailers.…
- 5 mths ago
- 4 replies
- 2,542
- CoveCove Employee1 yr ago
- Sales Questions
Powering the Touch Screen Panel
The Touch Screen Panel is an all-in-one alarm system. This means the siren, back-up battery, processor and communicating devices are all contained in the panel.…
- 3 mths ago
- 3 replies
- 2,497
- 1
- Whitney Weingartner4 mths ago
- Cove Touch Panel Installation
Installing Window Sensors
Step by Step Guide if you are adding new equipment to your alarm system, make sure you have already added this Window Sensor to your alarm system before you install this piece of equipment.…
- 3 mths ago
- 2,440
- 1
- Installing Sensors
What is my Safe Word?
Your Safe word or Central Station Passcode is a word or phrase that you created when you purchased your system. The Safe word allows you to verify your identity with our Monitoring Station and Cove.…
- 5 mths ago
- 2,354
- 9
- After Install
Need Help Removing and/or Moving A Sensor?
If you have installed your sensors but now need to move them because you are: Remodeling your home Replacing a door Getting new windows Painting your walls or ceiling We recommend using a few simple…
- 5 mths ago
- 4 replies
- 2,305
- 1
- James McLoughlan4 mths ago
- After Install
Setting Up a Key Remote
Key Remotes do not require installation however, you will need to add your remote to your system. The video above will show you how; when using your remote, remember:…
- 5 mths ago
- 2,285
- 1
- Installing Sensors
Installing Smoke Heat Freeze Detectors
Step by Step Guide If you are adding new equipment to your alarm system, make sure you have already added the Smoke Heat Freeze Detector to your alarm system before you install the piece fo…
- 5 mths ago
- 2,033
- Installing Sensors
How to Change Door/Window Sensor Batteries
If you have received a Door or Window sensor Low Battery message on your panel , you will need to replace the battery promptly to ensure the device continues to function properly.…
- 5 mths ago
- 1,865
- 1
- Changing Batteries
Installation: Sensors Not Triggering
Above is a short video overview of how your installation process should go. If you are unable to get the panel to respond when you are triggering a sensor ,…
- 3 mths ago
- 1,714
- Installing Sensors
Adding a Door Sensor
The video above will walk you through adding your Door Sensors , you can also follow the steps below. Step by Step Instructions Click "Settings" on the top right-hand corner of the panel touch…
- 5 mths ago
- 1,536
- Adding/Removing Sensors
Installation: Sensors Not Verifying
We have designed our panel to walk you through the process of installing your sensors . However, if you are unable to get a sensor to verify, after the third try the panel will prompt you to call…
- 3 mths ago
- 1,386
- Installing Sensors
What If I Swapped The Installation Of My Door or Window Sensors?
This article is only for situations where you have installed a door sensor on a window or a window sensor on a door. This is most likely to happen if you placed your sensors prior to powering the…
- 5 mths ago
- 1,292
- Installing Sensors
Installing Carbon Monoxide Detector
Step by Step Guide If you are adding new equipment to your alarm system, make sure you have already added the Carbon Monoxide Detector to your alarm system before you install the piece of equipment.…
- 5 mths ago
- 1,271
- 1
- Installing Sensors
Brief Video Overview of Alarm Installation Process
This video provides a shortened version of the installation process for the Cove Touch panel and sensors . For a more detailed installation video, you can view How to Install the Cove Security…
- 3 mths ago
- 1,249
- Just Ordered, Now What?
Adding a Window Sensor
The video above will walk you through adding your Window Sensors , you can also follow the steps below. Step by Step Instructions Click "Settings" on the top right-hand corner of the panel touch…
- 5 mths ago
- 2 replies
- 1,092
- Admin2Cove Employee7 mths ago
- Adding/Removing Sensors

1 2 Next

How can we help?

installation

How to Install the Cove Security System

Commonly Asked Questions

Preferred Locations for your Touch Screen Panel

Alarm Certificate

Installing Door Sensors

What Do I Do If I Move To a New Home or Location?

Alarm Permit

Installing Glass Break Detectors

Stuck During Setup Process Steps 1-6

Installing Motion Detectors

How Do I Order Replacement Batteries?

Powering the Touch Screen Panel

Installing Window Sensors

What is my Safe Word?

Need Help Removing and/or Moving A Sensor?

Setting Up a Key Remote

Installing Smoke Heat Freeze Detectors

How to Change Door/Window Sensor Batteries

Installation: Sensors Not Triggering

Adding a Door Sensor

Installation: Sensors Not Verifying

What If I Swapped The Installation Of My Door or Window Sensors?

Installing Carbon Monoxide Detector

Brief Video Overview of Alarm Installation Process

Adding a Window Sensor

Categories

Equipment/Services

Company

Help

Exclusive Pricing

Home