9

Setting Up a Key Remote

  • updated 11 mths ago

Key Remotes do not require installation however, you will need to add your remote to your system. The video above will show you how; when using your remote, remember:

  • You can trigger your device by pressing and holding any button for three seconds
  • Remotes have an operating range of approximately 100ft from the Cove Touch panel

Adding Remote

  1. Click "Settings" on the top right-hand corner of the panel touch screen
  2. Enter your four-digit Master code
  3. Click "Sensors"
  4. Click Remotes this will be the last button on the top row
  5. Click "Add New Sensor"
  6. Trigger the Remote by pressing and holding any button for three seconds (The panel will indicate the sensor has successfully been added)
  7. Press Continue
  8. Select the name of the Remote
  9. Select Next

If you have additional Remotes to add select "Add more Remotes" otherwise select "Done Adding Remotes"

Was this article helpful?
9 found this helpful

Related Articles

Recently Viewed