A Few Things to Know:  

• Make sure to complete the entire pairing process before placing your camera.
• If you wish to save recordings, a microSD card must be inserted.
• This camera must be plugged into a standard AC power outlet to operate.
• If you wish to place your camera high on a wall, you might consider installing an outdoor camera rather than an indoor camera, The outdoor camera does not require an outlet and comes with a mounting bracket.   

Selecting a Location

The camera can be placed on a table or shelf, or it can be mounted on a wall or ceiling

Keep the camera at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. This will help to prevent infrared reflection, which can harm the night vision performance.

Mounting the Indoor Camera on a Ceiling

Place the positioning card against the ceiling and then mark the screw holes using a #2 pencil. 

Drill holes with a 5/16” (8 mm) drill bit.

Insert the anchors into the holes, align the holes on the mounting plate with those in the ceiling, and use a Phillips-head screwdriver to fasten the screws through the mounting plate to the ceiling.

Align the grooves with the mounting plate and rotate the camera clockwise until it clicks into place.

For any questions on mounting or installation not listed in this article, please refer to the quick start guide located in the packaging of your equipment or contact our support team for further assistance.