Sound Controls for the Alarm Panel
Written by Naomi Ramirez
Updated at September 4th, 2025
Table of Contents
You can adjust a variety of sound settings directly on your Alarm Panel. These settings apply only to that individual panel. If you have multiple panels, repeat these steps for each one.
Access Sound Settings
- Tap More on the bottom navigation bar
- Select Settings
- Select Sounds
Adjust Alarm Volume
- Controls the siren volume for this panel only (not the Hub)
- Steps:
- Go to More > Settings > Sounds > Alarm Volume
- Slide the bar right to increase volume or left to decrease
- A click sound will preview the volume
- The setting is applied automatically
Toggle Voice Feedback
- Enable or disable audible announcements (doors open/close, system armed/disarmed)
- Steps:
- More > Settings > Sounds > Voice Feedback
- Toggle on (blue) or off (grey)
- You can also enable/disable individual announcements from the list
Adjust Status & Keypress Volume
- Controls clicking sounds when pressing the screen
- Steps:
- More > Settings > Sounds > Status & Keypress Volume
- Slide right to increase or left to decrease
- Toggle Keypress off to silence clicks
Toggle Chime Sounds
- Default chime (the beeping noise coming from the Alarm Panel) plays when doors open/close
- Steps:
- More > Settings > Sounds > Status & Keypress Volume
- Toggle Chime on (blue) or off (grey)
- To disable chimes system-wide, see the Global Chime section in the Hub Settings on the Alarm Panel article
Media Volumes & Doorbell Tone (Camera/Doorbell)
This toggle is intended for future development when we can incorporate the camera’s viewability on the Alarm Panel. In its current iteration, it doesn’t serve a purpose. This section will be updated once we have added that functionality.
Quiet Hours
- Silences chimes and voice feedback during specified times (alarms and sirens will still sound)
- Steps:
- More > Settings > Sounds > Quiet Hours
- Toggle on (blue)
- Set Start Time and End Time
- Settings apply automatically