Adding and Removing Your Water Leak Detector

Adding Sensor

You have the ability to add equipment through the Cove Connect App. Please refer to this article for more information. 

Please Note: When Adding this Detector you can enroll the sensor to detect water leakage as well as low or freezing temperatures. To do so:

1. Add the Sensor in first as either the Flood or Freeze function
2. After Adding in the sensor as Flood or Freeze, enroll the sensor again with the same serial number and the other function that wasn't enrolled on the first enroll session. 

Remove Sensor

You have the ability to remove equipment through the Cove Connect App. Please refer to this article for more information.