Glass Break Sensor Tampering
Written by Naomi Ramirez
Updated at August 20th, 2025
Table of Contents
The Glass Break Sensor has a built-in tamper switch to deter unauthorized interference. When the panel reports a tamper trouble condition it usually means the mounting plate and the sensor are loose or not properly seated.
Troubleshooting Sensor Tampering
- Make sure the sensor is securely seated to the mounting plate. (It is recommended to remove and re-attach the sensor to the plate to ensure proper seating).
- Verify that the button on the side of the sensor is not being inadvertently pressed (this will cause a tamper)
If your sensor continues to report tampering and you have ensured proper sensor alignment, please reach out to our support for further assistance.