Glass Break Sensor Tampering

The Glass Break Sensor has a built-in tamper switch to deter unauthorized interference. When the panel reports a tamper trouble condition it usually means the mounting plate and the sensor are loose or not properly seated. 

Troubleshooting Sensor Tampering 

• Make sure the sensor is securely seated to the mounting plate. (It is recommended to remove and re-attach the sensor to the plate to ensure proper seating). 

• Verify that the button on the side of the sensor is not being inadvertently pressed (this will cause a tamper)

If your sensor continues to report tampering and you have ensured proper sensor alignment, please reach out to our support for further assistance.