0
Eufy App features that are currently unavailable in the Cove Connect App
Eufy App features that are currently unavailable in the Cove Connect App
| Eufy Features Missing or Different on Cove Connect App |
Cameras Affected | Description of What the Feature Does |
| Arming features for Camera | All Cameras | Allows you to have your camera behave a certain way depending on the arming status. You can have the camera turn on or off or do a number of other features as seen in the image. |
| Eufy Camera Arming Mode Setting Customization (Home / Away) | All Cameras | Cameras can be individually customized for each Arming Setting |
| Arming Mode Camera Scheduling | All Cameras | Allows user to adjust the window of time to customize the "arming mode" to be active/inactive in an armed state. |
| "Group Control" | All Cameras | Allows user to group equipment together so they can arm select groups one way while leaving other cameras in another group unarmed. |
| Indoor Camera Playback/CVR | Indoor Camera | Allows user to go back and review the continuously recorded footage for as far back as the feature was turned on or until the earliest recording available. |
| Continuous Recording Feature | Indoor Camera | Allows user to toggle on the cameras ability to record continously. |
| Privacy Mode Scheduling - (Disarmed / Home) | Indoor Camera | When in a disarmed state, sets the camera to a privacy mode on so it is not capturing recordings |
| Siren Control (Arming Mode Feature) | Indoor, Outdoors | Eufy Arming Controls have an option for their cameras to trigger a siren alarm when they are activated in "Away" mode |
| Pairing - Installation Instructions | All Cameras | During the pairing process it gives installation instructions for each camera model |
| Solar Charging efficiency page/ battery percentage trend | Outdoors | This Dashboard helps inform the customer how efficiently the solar panel is working at the location where they have installed their Outdoor Camera. |
| Power Management | Outdoors, Doorbell | Power Management gives customers additional tools to maximize battery life or maximize surveillance options based on the customer's preference. |
| Pairing - Test Signal Strength | All Cameras | When pairing Eufy Cameras it has an option to test the Wi-Fi strength so that the customer can know if their WiFi will be sufficient at their desired install location |
| Clip length toggle | Outdoors, Doorbell | Allows the customer to customize the recorded event clip length and cooldown period & to stop recording if motion stops |
| Interval between triggers (cooldown window) | Outdoors, Doorbell | Allows the customer to customize the recorded event clip length and cooldown period & to stop recording if motion stops |
| "End clip early if motion stops" toggle | Outdoors, Doorbell | Allows the customer to customize the recorded event clip length and cooldown period & to stop recording if motion stops |
| Sound Detection | Indoor Camera | Sound Detection Settings allow the customer to change how sensitive they want the sound detection to be as well as if they want their indoor camera to move the camera towards the source of the sound |
| Live Feed UI | All Cameras | Compare the cove connect User Experience to the Eufy. Flows are a lot cleaner, design is more aestetically pleasing |
| Motion Tracking | Indoor Camera | Allows the camera to follow along the motion detected object until the object is out of sight or until motion has stopped. |
| Motion Test Mode | Outdoors | Allows the customer to test their Outdoor Cameras and verify that they are picking up motion detection at the location and angle where they have installed their cameras. |
| Notification Control | All Cameras | When completing pairing (and can adjust in settings) user can select what all displays on the push notification (including image thumbnail), depending on the level selection influences the speed to receive notifications. |
| Ringtone Settings | Doorbell | Changes the doorbell ring noise at the chime |
| Custom Voice Responses to Motion Detection | Doorbell | Allows the user to send prerecorded messages (either custom made ones from the user or template messages from a recorded voice) to broadcast on to the doorbell. |
| Pairing - Notification Customization | All Cameras | When completing pairing (and can adjust in settings) user can select what all displays on the push notification (including image thumbnail), depending on the level selection influences the speed to receive notifications. |
| Default Camera Position (Indoor Camera) | Indoor Camera | Set's the default pan/tilt position upon initial startup for the camera. |
| Pan Tilt Settings | Indoor Camera | Allows user to adjust the speed of pan and tilt |
| Use existing doorbell chime setting | Doorbell | Allows user to be able to use an existing mechanical chime so the chime goes off on the existing chime as well as the app. |
| Settings UI | All Cameras | Compare the cove connect User Experience to the Eufy. Flows are a lot cleaner, design is more aestetically pleasing |
| 360 Round Look. | Indoor Camera | Causes the camera to pan and tilt to look around the entirety of it's surroundings. |
| Speaker Volume | All Cameras | Eufy App allows the customer to control the 2-way speaker volume level for their cameras |
| Doorbell Audio Volume | Doorbell | Increase/Decrease the audio coming from the doorbell |
| Doorbell Ringtone Volume | Doorbell | Increase/decrease the volume from the ring on the doorbell and chime |
| Recording Quality | All Cameras | Eufy App has the option to control clip recording quality for their cameras |
| Eufy Doorbell Alert Tones (Motion & Ring) | Doorbell | Change the Tone/ noise the doorbell and chime make when doorbell is pressed on the application |
| Privacy Angle | Indoor Camera | sets the default viewing angle of the camera when in privacy mode. |
| Watermark Setting | All Cameras | Eufy App has the option to remove watermarks and logo from livefeed |
| Alexa as a Chime | Doorbell | Allows user to configure their alexa device to chime when doorbell is pressed. |
| Notification - Switch Arming Modes by Schedule | Chime | Push notification sent to user that arming mode has been set |
| Notification Switch Arming modes by Geofencing | Chime | Push notification that arming mode has been set |
| Notification - Switch Armign modes via app | Chime | Push notification that arming mode has been set |
| Cross Camera Tracking | All Cameras | Premium service from eufy that allows videos of same event and person for quick reviews. |
| Clips - Event clip donation (to enhance AI improvement) | All Cameras | allows users to send their clips to Eufy to have it's AI be calibrated and refined for motion detection. |
| Share Device | All Cameras | Allows users ability to share their cameras viewability and access to the camera. |
| Additional Doorbell Chime (for Homebase 2 and 3) | Doorbell | Allows user to use their homebase (if they have it) to also operate as a chime. |
| Pairing - Power source selector | S220 | Allows the customer to choose which power management mode they would like for their Outdoor Camera while pairing |
