How to Reset the Eufy Indoor Camera

1. To reset your Eufy Indoor Camera please press and hold the "Sync" button located at the bottom of the camera for roughly 10 seconds or until you hear the double beep.

   

2. Wait for the camera to complete its reboot sequence and then attempt to pair again. This may take up to 1 minute.

How to Reset the Eufy Outdoor Camera

1. To reset your Eufy Outdoor Camera please press and hold the "Sync" button located on the bottom of the camera for roughly 10 seconds or until you see a rapid blue flashing sequence on the LED indicator light.

   

2. Wait 30 seconds for the camera to complete its reboot sequence.

How to Reset the Eufy Doorbell Chime

1. Make sure your Chime is Plugged In and the Status Light is lit up. If you plug in the Doorbell Chime prior to resetting it, please allow 2-3 minutes for the chime to complete its boot sequence before attempting a reset.
    
2. To reset your Eufy Doorbell Chime please insert a small pin into the reset hole located on the side of the chime.

   

3. Insert, Press and Hold the pin until the Chime indicates that it is resetting.
    
4. Allow a few minutes for the Chime to Complete its reset and reboot.
    
5. The chime is now ready for setup.

How to Reset the Eufy Doorbell Camera

1. To reset your Eufy Doorbell please press and hold the "Sync" button located on the back of the camera until you see the camera’s LED rapid flash blue (roughly 15 seconds).