Secondary Siren Tamper

The Secondary Siren has a tamper button on the inside of the siren that will send a tamper signal when the cover for the battery is open.

Most alarm equipment has a built-in tamper switch to deter unauthorized interference. When the panel reports a tamper trouble condition it usually means the sensor casing is loose. This occurs most frequently after changing device batteries.

Troubleshooting Siren Tampering

1. Make sure the siren casing is secure.

2. Remove and re-attach the cover of the siren.

If the tampering alert persists for your siren after performing the suggested troubleshooting above, please reach out to our support team for further assistance.