Help Center
Installation
Just Ordered
Customer Portal Questions
855.268.3669
How to enable Javascript
Home
Tags
using my system
How it works - Key Remote
These sensors use radio signals to disarm or arm the system within a range of 100-120 feet from the panel indoors, or 300 feet if you are outdoors. Remote FAQ How do I use my Remote?…
updated
5 mths ago
2777
10
Key Remotes
How It Works - Medical Button
Medical Buttons use programming to determine the kinds of signals that will be received by our monitoring station. Medical vs SOS FAQ When you purchase a Medical button with your system it can…
updated
5 mths ago
2036
10
Medical Button
User Manual
The file attached to this article is a digital copy of our User Manual. You should have received this manual in your package, however, if you are unable to locate it at this time,…
updated
2 mths ago
2926
10
Just Ordered, Now What?
Complete Sensor Signal Test
The purpose of this test is to verify the communication of your system with the monitoring station. Testing your Sensors Enter your Settings on the panel on the top right of your touch screen.…
updated
5 mths ago
10602
6
Post-Installation
Arming in Stay Mode
Arm Stay & Night Mode When arming the system, select this mode when people will be staying inside the home. This mode arms your door, window, and glass break sensors but leaves the motion sensors…
updated
2 mths ago
10932
5
Arming and Disarming From Your Panel
How to Delete/Remove a Piece of Equipment
The video above shows the process of removing a sensor from your Cove panel. You will want to remove the sensor from the panel before removing it from its installation location.…
updated
5 mths ago
6490
5
Installation Articles
Check System History
The history screen will show up to 200 of the most recent events including the time and date of occurrence. The 201st event will automatically erase the oldest event.…
updated
2 mths ago
1691
5
History and Alerts
Update Panel Location Setting (i.e. Wall or Table Location)
This panel can be wall-mounted or desk/table/countertop mounted. Selecting "Table" as the panel location will disable the panel tamper feature for wall mounting situations.…
updated
6 mths ago
3115
4
Preferences and Settings
How to Bypass Sensors
Understanding Bypass Sensors Bypassing a sensor allows the alarm system to temporarily ignore a particular sensor. The system can arm stay or arm away and monitor all other sensors except those that…
updated
6 mths ago
7114
4
Testing and Bypassing Your Equipment
Arming in Stay Mode
Arm Stay & Night Mode When arming the system, select this mode when people will be staying inside the home. This mode arms your door, window, and glass break sensors but leaves the motion sensors…
updated
2 mths ago
2110
3
Arming and Disarming From Your Panel
How to "Silent Arm" your System
This feature is useful when you want to arm your system, however, you do not want to hear the beeping of the countdown. Silent Alarm Will: Remove beeping noises during the arming countdown Double the…
updated
2 mths ago
3569
3
Arming and Disarming From Your Panel
Arming in Away Mode
Arming Away When arming the system, select this mode when people will be leaving the home. When armed, all intrusion sensors (including motion sensors) are actively protecting your home and will…
updated
2 mths ago
4387
3
Arming and Disarming From Your Panel
Understanding Your Panel Display
Hello, Welcome to Cove! We are excited to partner with you to protect your home and family. Since you are new to our family, we want to give you the tools needed to understand your panel display and…
updated
6 mths ago
3468
3
Preferences and Settings
Renaming a Sensor
The video above will show you how you can rename your sensors. This will be helpful if you place the wrong window sensor on a window. If you, however, placed a window sensor on a door,…
updated
2 mths ago
4904
3
Installation Articles
I Armed Away, but my system Armed Stay, why?
Auto Stay Mode When commanded to arm away, via the keypad only, your system is designed to automatically default back to arm stay if no protected exterior doors are opened and closed during the…
updated
2 mths ago
6045
3
Arming and Disarming From Your Panel
Testing Alarm Sound & Siren
Understanding Different Sound and Siren Testing Options It is recommended that you test your alarm system regularly. Please follow these steps to properly test the sound and audio of your system…
updated
6 mths ago
2513
3
Testing and Bypassing Your Equipment
Arming Away Mode Via Key Remote
Select this mode when the house will be unoccupied. This mode will arm all intrusion sensors, including any motion sensors. Large pets that are free to roam the home while you are gone could trigger…
updated
2 mths ago
1111
2
Key Remotes
How It Works - Door Window
There are two parts to these sensors. The bigger piece is the sensor that communicates with the panel, and the small piece is a magnet. The sensor detects the magnet;…
updated
6 mths ago
3985
2
Door/Window Sensors
How It Works - Smoke Heat Freeze
This piece of equipment is critical for life and property protection. Unlike traditional smoke detectors, our Smoke Heat Freeze Detector alerts you and the monitoring station automatically in the…
updated
5 mths ago
3400
2
Legacy Sensors
Disarming System via the Panel
When the system is armed, your Cove Touch panel screen will read either “I’m armed in stay mode” or “I’m armed in away mode.” When armed, all intrusion sensors are actively protecting the home and…
updated
2 mths ago
1919
2
Arming and Disarming From Your Panel
Adjust Sensor Entry Delay
When your system is armed, opening a door/window sensor will begin a 30-second audible entry delay countdown before triggering the alarm. This delay reminds the user to disarm the system and also…
updated
6 mths ago
3020
2
Preferences and Settings
Adding, Resetting, or Removing Users
Adding, resetting, or removing user passcodes allows you to modify any current or future user passcodes. The Cove Touch panel allows up to 20 user passcodes.…
updated
6 mths ago
2764
2
Preferences and Settings
Testing Cellular Communication
Understanding Sensor and Cellular Communication It is recommended that you test your alarm system regularly. Please follow these steps to properly test the cellular communication of your system:…
updated
6 mths ago
4560
2
Testing and Bypassing Your Equipment
How It Works - Glass Break
Glass Break detectors use a microphone to hear certain sound frequencies emitted by glass when it breaks, cracks, or shatters. For this reason, we do NOT recommend installing this sensor in the…
updated
2 mths ago
3890
1
Glass Break Detector
How To Choose What Equipment You Need?
Security systems are comprised of different levels of protection. Some people are content with a basic alarm system, while others may require more. This article will explain the three levels of…
updated
5 mths ago
2306
1
Pre-Purchase Information
1
2
Next
Recently Viewed
Installation
Just Ordered
Customer Portal Questions
855.268.3669
Home
Cove Simple
Pre-Purchase Information
Customer Portal and Account Questions
Just Ordered, Now What?
Touch Screen Panel
Installing and Troubleshooting Touch Screen Panel
Testing and Bypassing Your Equipment
Preferences and Settings
Alarm Events
Arming and Disarming From Your Panel
Powering Your Touch Screen Panel
History and Alerts
Sensors
Door/Window Sensors
Motion Detector
Glass Break Detector
Smoke Detector
Carbon Monoxide Detector
Flood Sensor
Medical Button
Legacy Sensors
App and Key Remote
Key Remotes
Cove Mobile App
Security Cameras
Eufy Indoor Camera
Eufy Doorbell Camera
Eufy Outdoor
SkyBell Doorbell Camera
Kami Doorbell Camera
Camera Troubleshooting and App Monitoring
Cove Outdoor Camera
Cove Indoor Camera
Installation
Installation Articles
Post-Installation
Understanding Your Alarm
False Alarms
TripleTouch Alarm Response
Cove Connect
Pre-Purchase Information
Pre-Purchase Information
Just Ordered, Now What?
Just Ordered, Now What?
Customer Portal and Account Questions
Customer Portal and Account Questions
Security Cameras
Eufy Indoor Camera
Eufy Doorbell Camera
Eufy Outdoor Camera
Kami Doorbell Camera
Outdoor Cameras
Indoor Cameras
Alarm Panel
Installing /Troubleshooting Alarm Panel
Testing and Using Your Alarm Panel
Preferences and Settings
Alarm Events
Arming and Disarming From Your Panel
History and Alerts
Hub
Installing and Troubleshooting your Hub
Sensors, Sirens, and Key Remotes
Door/Window Sensors
Motion Sensor
Glass Break Detector
Smoke Heat Detector
Carbon Monoxide Detector
Water Leak Detector
Medical Alert Necklace
Key Remote
Secondary Siren
General Sensor Troubleshooting
Application
Cove Connect App
Scenes, Favorites, and Groups
Installation
Installation Articles
Post Installation
Smart Home Devices
Alexa and Google Home