Adding your CO Detector

Step-by-Step Guide If you are adding new equipment to your alarm system, make sure you have already added the Carbon Monoxide Detector to your alarm system through the app before you install the piece of equipment around your home. Common Installation Locations Hallway Utility room Rooms with gas appliances Locations to Avoid Do not install the sensor in the following areas: Next to a door or window that would be affected by drafts In or below a cupboard Outside the home Where airflow would be obstructed by curtains or furniture Where dirt or dust could collect and block the detector Where it could be knocked over, damaged, or inadvertently removed Best Practices Place the CO Detector within 10 feet of sleeping areas and in bedrooms that contain fuel-burning appliances If the appliance or room is not normally used, such as a boiler room, the CO Detector should be placed just outside the room so the alarm can be heard Ceiling Mount - place the CO Detector at least 12 inches from any wall (measured from the closest outside edge of the detector). The green area below indicates proper placement. Wall Mount - place the CO Detector at least as high as a light switch and at least 6 inches from the ceiling (measured from the closest outside edge of the detector). The green area below indicates proper placement. Mounting the Carbon Monoxide Detector Consult the user manual for detailed installation and maintenance instructions. Remove the adhesive backing Press firmly and hold in place for 30 seconds…